- Abrasive Saw
Abrasive saw or a cut-off saw or chop saw is used to cut hard materials like metals, tile, or concrete. The abrasive saw is available in different types like table top, free hand and walk behind models.
- Biscuit Joiner
A biscuit joiner is a woodworking tool that uses a small circular saw blade to cut a crescent shaped hole in the opposite edges of two pieces of wood to join the two pieces together.
- Cold Saw
A cold saw is a type of a circular saw designed to cut metal.
- Concrete Saw
A concrete saw is used for cutting concrete, masonry, brick, asphalt, tile, and other such solid materials. Concrete saw can be a small hand-held cut-off saw, a big walk-behind saw or any other style.
- Miter Saw
A miter saw is used to make accurate crosscuts and miters in a workpiece.
- Panel Saw
A panel saw is any type of sawing machine with a sliding table that cuts sheets into sized parts.
- Pendulum Saw or Swing Saw
A swing saw also known as a cut-off trim saw is used in a mill for cutting right angle to the direction of the wood grain.
- Radial Arm Saw
A radial arm saw consisting of a circular saw which is mounted on a sliding horizontal arm. The radial arm saw was primarily used for cutting long pieces of stock to length in the earlier times.
- Table Saw / Circular Saw
A table saw / circular saw consists of a circular saw blade, mounted on an arbor that is driven by an electric motor. The blade protrudes through the surface of a table, which provides support for the material being cut.
As the circular saw is ideal for cutting wood we supply a wide variety of circular saws
For example the roller table saw
is very safe and fast to use, the log grip hold the timber and releases the table so that the wood can be cut keeping the operators hands away from the sawblade. The simple rolling motion make the sawbench easy to use. Mounted on solid rubber wheels means the unit can be moved in to position easily.
Another example is the Circular Drum Saw SAT4-700.
Either powered by Tractor PTO + Hydraulic Conveyor or Dual Drive PTO
or Electric. It is a fast and efficient log sawing machine that is easy to operate
Uses a drum with 4 housings to hold togs of cross-section 240 mm and maximum Length 1200 mm, is driven by a belt; the continuous rotation draws in the log which will be sawn by a blade with carbide teeth, 700 mm in diameter.
Adjusting the sawing length of the logs (25-33-50 cm + intermediate positions) is very easy without having to change the drum or use tools: a notched lever acts on the drum shaft and takes it to the desired position. The pieces of sawn wood slide into the chute and are carried to the telescopic 5 meter evacuation belt. This can be optionally equipped with a hydraulic cylinder.
The SAT4-700 is available in two versions drive by the tractor PTO or combined PTO and three-phase electric motor, 9.2 kW.
Contact us for advice when buying your circular saw