Directions for use:
Ensure surface to be treated is cool and any heat source is extinguished.
Remove all rust, scale, dirt, grease and check surface is dry.
Apply by brush or spray.
Agitate paint until well mixed.
Recommended thickness 22 microns ± 3 microns.
Practice - this means apply in thin coats, allow to fully dry before applying next coat.
Building up in layers this way gives maximum high temperature resistance.
Coverage approximately 7m²/Litre at 20 microns.
Use only Xylene thinners.
Touch dry in 2-3 hours at room temperature.
Oven cure - 20 minutes at 250°C metal temperature.
Adequate ventilation should be provided at all stages of the curing operation.